Silvercrest HG10599 handleiding
Handleiding
Je bekijkt pagina 9 van 22
9 GB/IE/NI
Once charging has completed, remove the USB type C plug on
the USB Cable (Type A to C)
14
from the headphones.
Using the headphones
Connect the headphones with a communication device.
Place the headphones near a switched on communication
device (e.g. mobile or computer).
Pairing with a new Bluetooth
®
device: Hold the Multi Function
Button
6
for approx. 2 seconds until the LED
10
flashes red
and white alternately. This
indicates the headphones are now
ready to connect mode,
which
remains active for 5 minutes. If the
pairing with a playback device has not been established after 5
minutes, the headphones switch off automatically.
Now connect your communication device (mobile phone or
computer) via Bluetooth
®
with the headphones. Please refer
to the notes in the instructions for your communication device.
Select the entry “Rhythm On-Ear ANC“ from the list of devices
detected by your computer or mobile.
Once the connection has been established, the LED
10
will flash
white every 5 seconds.
Please note, your communication device must support Bluetooth
®
Standard 5.3 to use all options.
You may need to approve the connection on the communication
device. Please refer to the instructions for use of the communi-
cation device on this topic!
The headphones may be manually switched off by holding the
Multi Function Button
6
for 5 seconds until the LED
10
goes
off.
Bluetooth
®
indicator:
LED indicator status Headphone state
Flashing red and white Pairing mode
Flashing white once every 5 seconds Paired
Connecting the headphones to
a second Bluetooth
®
device
The headphones may be connected to two Bluetooth
®
communica-
tion devices at the same time. If the headphones are already conn
ected
to a device, follow the steps below to connect to the second device:
Activate multipoint mode by pressing and holding Bluetooth
®
button
11
for 2 seconds. The first communication device (mobile
phone or computer) is disconnected.
Now connect to the second communication device via Blueto
oth
®
with the headphones. Please refer to the notes in the instructions
for your communication device. Select the entry “Rhythm On-
Ear ANC“ from the list of devices detected by your computer
or mobile. The second communication device is connected.
Select the entry “Rhythm On-Ear ANC” from the list of devices
detected by your first communication device/computer. Now,
both communication devices are connected to the headphones
simultaneously.
After connected the headphone with 2 Bluetooth
®
devices,
you can playback music via either one of device.
Clearing paired devices
You can clear up the paired device anytime. Please make sure
headphone Bluetooth
®
is under disconnected status. Please
press both Bluetooth
®
button
11
and Multi Function Button
6
together at the same time for approx. 2 seconds.
The memory in the headphones is cleared and it will not
auto-connected to the previous paired communication device.
Connecting the headphones
through audio cable
Insert the audio cable with 3.5 mm jack plug
13
to 3.5 mm
jack socket
8
.
Insert the other audio cable with 3.5 mm jack plug
13
to 3.5 mm
jack socket of your playback device.
When a 3.5 mm cable is plugged into the 3.5 mm jack socket
8
, the Bluetooth
®
connection will be disconnected. The ANC
function turns OFF.
Start a playlist on your playback device. You can only adjust
the music volume on the playback device.
Active Noise Cancellation function (ANC)
In order to filter out unwanted noises from surrounding you can
enable the active noise cancellation (ANC) function.
Press once the ANC button
9
to switch ON/OFF the ANC
function and an acoustic signal will sound.
Voice control function with Siri/
Google assistant
Please follow below steps to activate the Voice Control function:
1. First activate Siri or Google assistent on you mobile device.
Bekijk gratis de handleiding van Silvercrest HG10599, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Silvercrest |
| Model | HG10599 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2244 MB |
