Silk'n VacuPedi FTC04 handleiding
Handleiding
Je bekijkt pagina 11 van 45
11
EN
3. Press the control button ( ) again if you want a higher
speed setting.
The product is now turned on at a high speed. The
LED lights will blink blue.
4. Move the rotating grinding disc
4
over the parts of
your skin you intend to treat. In the process, apply
gentle pressure and only keep the grinding disc on a
spot on your skin for two to three seconds at a time,
then check the result (see Fig. C).
Do not cover the ventilation holes
9
during operation
to avoid overheating.
The dust created during treatment will be sucked into
the dust chamber
10
.
5. When treatment is done, press the control button ( )
a third time to turn the product o. The LED lights will
also turn o.
2.8 Charging
• The product cannot be used during charging.
• Only charge the product at temperatures
between 0 and 40 °C.
• Fully charge the product before first use and
when the battery power is low.
• It takes approx. 2.5 hours for a full charge.
• When the battery power is low, the LED
lights become red and start to blink during
operation. Recharge the product.
1. Plug one end of the USB cable
11
into the charging
port
2
.
2. Plug the other end of the USB cable into the USB port
of a compatible USB power source (not included)
(e.g. USB wall adapter, type C, 5V DC).
3. Plug the USB wall adapter into a mains socket for
charging.
Bekijk gratis de handleiding van Silk'n VacuPedi FTC04, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Silk'n |
| Model | VacuPedi FTC04 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2744 MB |
