Silk'n Tightra H2400 handleiding
Handleiding
Je bekijkt pagina 13 van 82
Control Mode Action Explanation
Battery
indicator light
(#4)
--- Green (blinks)
Green (constant)
Device charging
Device charged
Both
modes
Orange (blinks) Low charge in the battery
Orange
(constant)
No charge in the battery
4.3 Changing modes and energy levels
U
Internal mode: This is the default setting when the device
is first switched on.
U
External mode: To change to the external mode before
you start a treatment, short press the control button (#3)
3 times. You can do this within the first minute that the
device is on.
U
Change modes during use: Once you are using the
device, you will need to shutdown the device, restart it, and
then select the mode you want.
U
Change energy levels during use: To change internal
mode energy levels during a treatment, short press the
control button (#3). Each time you short press, you will
cycle through the 3 internal modes.
4.4 Device charging
Always charge the device before first use. The initial charge
should take approximately 6 hours.
U
Place the USB cable (#8) into the device. Place the other
end of the cable into the USB adapter (#9) and connect to
the electricity supply. The battery and treatment mode
indicator lights (#4, #2) will go on and off, and then the
battery indicator light (#4) will blink green.
EN
11
Bekijk gratis de handleiding van Silk'n Tightra H2400, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Silk'n |
| Model | Tightra H2400 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4801 MB |
