Handleiding
Je bekijkt pagina 28 van 160
Smart Functions
27
FCC Notice
Wireless LAN
module
Specifications
•
For transmitter module contained in this product
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Frequency Range 2412 to 2462 MHz
Output Power (Max) < 30 dBm
•
LG ThinQ is not responsible for any network connection problems or any faults,
malfunctions, or errors caused by network connection.
•
The surrounding wireless environment can make the wireless network service run slowly.
•
If the distance between the appliance and the wireless router is too far, the signal
becomes weak. It may take a long time to connect or fail to install the application.
•
If the appliance is having trouble connecting to the Wi-Fi network, it may be too far from the
router. Purchase a Wi-Fi repeater (range extender) to improve the Wi-Fi signal strength.
•
The network connection may not work properly depending on the Internet service provider.
•
The Wi-Fi connection may not connect or may be interrupted because of the home
network environment.
•
If the appliance cannot be connected due to problems with the wireless signal
transmission, unplug the appliance and wait about a minute before trying again.
•
If the rewall on your wireless router is enabled, disable the rewall or add an exception to it.
•
The wireless network name (SSID) should be a combination of English letters and
numbers. (Do not use special characters.)
•
Smartphone user interface (UI) may vary depending on the mobile operating system
(OS) and the manufacturer.
•
If the security protocol of the router is set to WEP, network setup may fail. Change the
security protocol (WPA2 is recommended), and connect the product again.
•
To disable the Wi-Fi function, press and hold the Wi-Fi Button for 3 seconds. The Wi-Fi
indicator will be turned off.
•
To reconnect the appliance or add another user, press and hold the Wi-Fi button for 3
seconds to temporarily turn it off. Run the LG ThinQ application and follow the
instructions in the application to connect the appliance.
Bekijk gratis de handleiding van Signature SKSSB4202S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Signature |
| Model | SKSSB4202S |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 15466 MB |
