Handleiding
Je bekijkt pagina 32 van 140
32 TROUBLESHOOTING
TROUBLESHOOTING
FAQs
Frequently Asked Questions
Before Calling for Service
Cooling
Q: What are the best temperature settings for my refrigerator and freezer?
A: The default setting for the refrigerator is 37° Fahrenheit (3° Celsius). The default setting for the
freezer is 0° Fahrenheit (-18° Celsius). Adjust these settings as necessary to keep food at desired
temperatures. Milk should be cold when stored on the inner shelf of the refrigerator. Ice cream
should be firm and ice cubes should not melt in the freezer.
Q: How do I set the refrigerator and freezer temperatures?
A: Continually press the Refrigerator or Freezer or Convertible button on the control panel until the
desired temperature appears. The numbers will cycle from highest to lowest and then return to the
highest again with continuous pressing.
Q: Why do I hear a buzzing noise from my refrigerator periodically?
A: This may happen if you do not have a water source attached to your freezer and the icemaker is
turned on. If you do not have a water source attached to the freezer you should turn the icemaker off
on the control panel.
Q: Why does the icemaker tray look crooked?
A: This is a normal part of the icemaker cycle. The icemaker tray may appear level or with a slight tilt.
The change in position is to assist in the freezing process.
Q: My refrigerator is powered on and the controls are working, but it’s not cooling and the display
shows “OF” (see below). What is wrong?
A: The freezer is in Display Mode. The Display Mode disables all cooling to conserve energy while on
display in a retail store. To restore normal operation, press Freezer button first to wake the display
then press and hold the Freezer and Water Filter Reset buttons until you hear a beep and the
temperature setting appears in the display. Use the same procedure to return the freezer to Display
Mode, if desired.
Problem Possible Cause & Solution
Refrigerator is not
cooling or has no
power.
The refrigerator control is set to OFF (some models).
• Turn the control ON. Refer to the Setting the Controls section for proper temperature
settings.
Refrigerator is set to Display Mode.
• Display Mode allows the lights and control display to work normally while disabling
cooling, to save energy while the refrigerator is on the showroom floor. See the FAQs
section of this manual for instructions on how to disable Display Mode.
en-us_main.book.book Page 32 Thursday, June 29, 2023 8:57 AM
Bekijk gratis de handleiding van Signature SKSFD3604P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Signature |
| Model | SKSFD3604P |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 17968 MB |
