Signature Hardware Pendleton SHTS98ZBN handleiding

Handleiding

Je bekijkt pagina 2 van 3
2
INSTALLATION
INSTALACIÓN
2. The stub out 5/8” pipe should extend a minimum of
1-1/2” from the wall, but not to exceed 2” from the
wall. Remove all burs and sharp edges from the stub
out 5/8” pipe. Sharp edges or burs can cut or damage
the o-rings inside of the tub spout.
Note: The distance from the valve to the tub spout
stub out should be between 8” (203.2mm) and 18”
(457.2mm).
2. El extremo sobresaliente de la tubería de 5/8 plg debe
extenderse 38mm como mínimo desde la pared, pero
sin pasar de 51mm. Elimina todas las rebabas y bordes
filosos del extremo sobresaliente de la tubería de 5/8 plg.
Los bordes o rebabas afilados pueden cortar o dañar las
juntas tóricas dentro de la boquilla de la bañera.
Nota: La distancia desde la válvula hasta el caño
sobresaliente de la bañera debe ser de 8” a 18”
(203.2mm a 457.2mm).
wall
pared
1 1/2" [38mm] min
2" [51mm] max
8" [203.2mm] min
18" [457.2mm] max
5/8" (16mm)
1. Shut o� water supply.
1. Corte el agua.
PENDLETON
TUB SPOUT
CAÑO DE LA TINA
SKU: 455772, 449844
1.855.715.1800

Bekijk gratis de handleiding van Signature Hardware Pendleton SHTS98ZBN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkSignature Hardware
ModelPendleton SHTS98ZBN
CategorieNiet gecategoriseerd
TaalNederlands
Grootte442 MB