Sigma Contemporary 16-300mm F3.5-6.7 DC OS handleiding

Lens

Sigma

33 pagina's

PDF beschikbaar

Handleiding

CONTEMPORARY

16–300 mm F3.5–6.7

DC OS

Thank you for purchasing a Sigma lens. Please

read this instruction manual carefully to correctly

understand the lens's functions, operation, and

handling precautions, and enjoy taking photo-

graphs.

WARNING!! : SAFETY PRECAUTIONS

– Do not look directly at the sun, through the

lens. Doing so can cause damage to the eye or

loss of eyesight.

– Do not leave the lens in direct sunlight with-

out the lens cap attached, whether the lens is

attached to the camera or not. This will pre-

vent the lens from concentrating the sun’s rays,

which may cause a fire.

– The shape of the mount and its surrounding

parts are very complex. Please be careful when

handling them so as not to cause injury.

– Please select a sturdy tripod that is capable of

supporting this lens. If the tripod is not sturdy

enough, it may cause the lens to fall.

– This lens has a built-in magnet. Please keep it

at least 5cm (2in) away from medical devices

such as cardiac pacemakers as it may adversely

affect them.

– Please do not place credit cards featuring a

magnetic strip (or any other object that is sen-

sitive to a magnetic field) close to the lens as

it could damage the data stored on the card.

DESCRIPTION OF THE PARTS (fig.1)

1. Filter Attachment Thread

2. Zoom Ring

3. Focus Ring

4. Zoom Lock Switch

5. Mount

6. Lens Hood

CAUTION

On cameras where lens aberration correction is

controlled with 'ON' or 'OFF' in the camera menu,

please set all aberration correction functions to

'ON'(AUTO).

DC LENS

This lens is designed for mirrorless cameras

equipped with an APS-C size image sensor. It can

also be used on full-frame mirrorless cameras, but

please note that the lens’s image circle will not

cover the entire sensor so the camera may need to

be switched into crop mode. For more information

on attaching an APS-C size lens to a full-frame

– Please do not use Optical Stabilizer in the fol-

lowing situations.

– When the lens is mounted on a tripod.

–

Bulb (long time exposure).

LENS HOOD

A bayonet type detachable hood is provided with

the lens. This lens hood helps to prevent flare and

ghosted images caused by bright illumination from

outside the picture area. Attach the hood and turn

clockwise until it stops rotation (fig.3).

– In order to place the lens and hood into the

storage case, you must first remove the hood,

then replace it on the lens in the reverse posi-

tion (fig.4).

BASIC CARE AND STORAGE

– Avoid any shocks or exposure to extreme high

or low temperatures or to humidity.

– For extended storage, choose a cool and dry

place, preferably with good ventilation. To

avoid damage to the lens coating, keep away

from mothballs or naphthalene gas.

– Do not use thinner, benzine or other organic

cleaning agents to remove dirt or finger prints

from the lens elements. Clean by using a soft,

moistened lens cloth or lens tissue.

– This lens is not waterproof. When you use the

lens in the rain or near water, keep it from get-

ting wet. It is often impractical to repair the

internal mechanism, lens elements and electric

components damaged by water.

– Sudden temperature changes may cause con-

densation or fog to appear on the surface of

the lens. When entering a warm room from the

cold outdoors, it is advisable to keep the lens

in the case until the temperature of the lens

approaches room temperature.

mirrorless camera, please refer to the instruction

manual of the camera you are using.

– In case the camera does not incorporate the

lens compensation function, the lens cannot

offer distortion compensation.

FOR CANON RF MOUNT

On compatible cameras, the focus ring can be

switched to function as a control ring. Please

refer to the instruction manual of your camera for

further details.

ATTACHING TO THE CAMERA BODY

Please refer to the camera’s instruction manual

for details on how to attach it to or detach it from

the camera body.

– On the lens mount surface, there are electrical

contacts. Please be careful with their handling

as scratches or dirt on them could cause mal-

functions or damage.

FOCUSING

For autofocus operation, set the camera to aut-

ofocus mode.

If you wish to focus manually, set the camera to

manual focus mode. You can adjust the focus by

turning the focus ring.

– Please refer to camera’s instruction manual

for details on changing the camera’s focusing

mode.

ZOOMING

Rotate the Rubber grip on the zoom ring to the

desired position.

ZOOM LOCK SWITCH

Thhis lens is also equipped with Zoom Lock Switch

to eliminate the zoom creep when the lens is tilted

down. Please set zooming ring to 16mm and set the

zoom lock switch to the “LOCK” position. (fig.2)

ABOUT OS (OPTICAL STABILIZER) FEATURES

This lens is equipped with OS (Optical Stabilizer)

functionality to reduce camera shake. Optical Sta-

bilizer ON/OFF settings are made on the camera

side. Please follow the instructions in your camera

manual to operate it.

– Press the shutter button halfway and make sure

the image is stable before shooting. (It takes

about 1 second for the image to stabilize.)

– The figures are for L-mount.

– The glass materials used in the lens do not

contain environmentally hazardous lead

and arsenic.

ENGLISH

Instructions

TECHNICAL SPECIFICATIONS

Lens construction 14 – 20

Angle of View 83.2° – 5.4°

Minimum Aperture F 22 – 45

Minimum Focusing 0.17 m – 1.05 m

(0.56 – 3.44 ft)

Maximum

Magnification

1:2 (At 70mm)

Filter Size ⌀ 67 mm

Dimensions (Maximum

Diameter × Length)

⌀ 73.8 × 121.4 mm

(⌀ 2.9 x 4.8 in)

Weight 615 g (21.7 oz)

Bekijk gratis de handleiding van Sigma Contemporary 16-300mm F3.5-6.7 DC OS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.