Siemens WT45H213GC handleiding
Handleiding
Je bekijkt pagina 25 van 40
Basic operation en
4.
Use a soft brush to clean the heat
exchanger cover.
Make sure that you remove all dirt
from the seal.
5.
Clean the filter mat thoroughly un-
der warm, running water and
squeeze it out by hand.
You can remove heavy soiling
carefully using a vacuum cleaner.
Do not clean the filter mat using
cleaning agents.
6.
Push the filter mat onto the retain-
ers.
Ensure that the cleaned filter mat
is not deformed, damaged or in-
verted when you push it onto the
retainers.
Note: You can order the filter mat
Page21
as a spare part from
customer service.
7.
Close the base unit.
Page29
11.12 Condensation container
Condensation that forms in the appli-
ance as it dries the laundry is collec-
ted by default in the condensation
container.
Note: Operate this appliance using
the water outlet hose provided.
Page11
If you connect the water outlet hose,
you do not have to regularly empty
the condensation container.
"Emptying the condensation con-
tainer", Page25
Emptying the condensation con-
tainer
If the drying programme has finished
or the display shows a notification
that the drying programme is paused,
empty the condensation container.
Requirements
The display shows the following
after drying: "End"
25
Bekijk gratis de handleiding van Siemens WT45H213GC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Siemens |
| Model | WT45H213GC |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 2882 MB |
