Siemens WT45H213GC handleiding
Handleiding
Je bekijkt pagina 22 van 40
en Basic operation
Turn the programme selector to a
programme.
11.2 Setting a programme
1.
Turn the programme selector and
set the required programme.
"Programmes", Page18
2.
If required, adjust the programme
settings.
"Buttons", Page17
The programme settings are not
saved permanently for the pro-
gramme.
11.3 Opening the door
1.
Grip under the door handle and
pull on the door.
2.
Open the door.
11.4 Loading laundry
Note: To prevent creasing, note the
maximum load for the programmes.
"Programmes", Page18
Requirements
The laundry is prepared and sor-
ted.
"Laundry", Page21
The drum is empty.
1.
Open the door.
Page22
2.
Place the laundry in the drum.
3.
Close the door.
Ensure that there is no laundry
trapped in the door.
11.5 Starting the programme
Requirements
A programme is set.
Page22
The door is closed.
Press Start/Reload.
The display shows the programme
duration or the programme end
time.
After the programme has ended,
the display shows: "End".
Note: When "Hot" is shown on the
display, the appliance cools the laun-
dry.
When "Hot" goes out, the laundry has
cooled down.
11.6 Adding laundry
After the programme starts, you can
remove or add laundry at any time.
1.
Press Start/Reload.
The cooling process starts auto-
matically after approximately 30
seconds and cools down the laun-
dry while the drum is rotating. If
you want to avoid or cancel the
cooling process, open the door.
Page16
2.
Open the door.
Page22
3.
Add or remove laundry.
4.
Close the door.
5.
Start the programme.
Page22
22
Bekijk gratis de handleiding van Siemens WT45H213GC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Siemens |
| Model | WT45H213GC |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 2882 MB |
