Siemens WT45H213GC handleiding
Handleiding
Je bekijkt pagina 12 van 40
en Installation and connection
properly, liquid may leak out of the
connecting piece.
Before operating the appliance,
connect the condensation hose or
water outlet hose properly to the
connecting piece.
Requirements
The appliance and the accessory
have been unpacked.
Page10
The appliance is installed at the in-
stallation location.
1.
Pull out the condensation hose
from the connecting piece.
The condensation hose is connec-
ted to the connecting piece at the
factory.
Note: When removing the con-
densation hose, liquid may leak
out of the connecting piece.
2.
Push the condensation hose into
the holder.
3.
Push the water outlet hose as far
as it will go into the connecting
piece.
4.
Insert the water outlet hose into the
hose guide.
Ensure that you do not bend the
water outlet hose.
5.
Empty the condensation container.
Page25
6.
Insert the condensation container.
Page26
7.
Connect the appliance to the water
drain.
Page13
Tip: To collect condensation in the
condensation container again (e.g. if
you change where the appliance is
located), carry out these steps in re-
verse order.
12
Bekijk gratis de handleiding van Siemens WT45H213GC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Siemens |
| Model | WT45H213GC |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 2882 MB |
