Siemens WM14N193CH handleiding
Handleiding
Je bekijkt pagina 112 van 462
4.9 Replacing door lock
As a manufacturer, we are obliged to provide consumers with the spare part door lock
including repair instructions in accordance with Regulation (EU) 2019/2023. However,
we would like to point out that after replacing a door lock, an electrotechnical safety test
by a qualified electrician is required before the device is put into operation. This person
must be verifiably qualified according to the country-specific laws, regulations and
standards.
Danger
Risk of electric shock due to live parts!
Danger to life through electric shock in case of improper repair
▶ Electric parts should be repaired by a qualified electricians.
▶ After the repair have a safety test according VDE 0701 or country-
specific regulations performed.
Warning
Slipping of tilted appliances!
Bone fractures / crush injuries
▶ Secure appliances against slipping.
Caution
Sharp housing edges!
Cut injuries
▶ Wear protective gloves.
Caution
Risk of falling parts due to released screws!
Injury because of falling parts.
▶ Secure component from falling down.
Notice
Risk of falling parts due to released screws!
Damage to other parts of the appliance or at customers home e.g. bot-
tom.
▶ Secure component from falling down.
Prerequisite:
Appliance is disconnected from power supply.
Appliance is disconnected from water supply.
Appliances is freely accessible.
Worktop has been removed.→Page 103
Detergent drawer has been removed.→Page 104
Fascia panel has been removed.→Page 106
Door has been removed.→Page 108
Tension ring has been removed.
Door seal has been removed.→Page 111
Pump cover has been removed.→Page 110
Front panel has been removed.→Page 115
4.9.1 Removing door lock
1. Disconnect door lock plug.
2. Release door lock.
3. Remove door lock.
Repair
2023-09-05_8001214495 Copyright by BSH Hausgeräte GmbH Page112of462
Bekijk gratis de handleiding van Siemens WM14N193CH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Siemens |
| Model | WM14N193CH |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 93242 MB |
Caratteristiche Prodotto
| Apparaatplaatsing | Vrijstaand |
| Soort bediening | Rotary, Touch |
| Kleur van het product | Wit |
| Deurscharnieren | Links |
| Ingebouwd display | Ja |
