Siemens WM14N193CH handleiding
Handleiding
Je bekijkt pagina 103 van 462
Repair
4.1 Replacing worktop
Required tools:
Torx Bit TX20 with hole Length 152mm, usable length
124mm, 1/4" hexagon drive
(6.35mm), for screws with safety pin
[00341272]
Prerequisite:
Appliance is disconnected from power supply.
Appliance is disconnected from water supply.
4.1.1 Removing worktop
▶
1. Remove screws (1).
2. Push worktop to the back of the appliance (2).
3. Move worktop upwards (3) to remove it.
4.1.2 Installing worktop
Observe cable installation. Cable could be trapped.
▶
Install in reverse order.
Repair
2023-09-05_8001214495 Copyright by BSH Hausgeräte GmbH Page103of462
Bekijk gratis de handleiding van Siemens WM14N193CH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Siemens |
| Model | WM14N193CH |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 93242 MB |
Caratteristiche Prodotto
| Apparaatplaatsing | Vrijstaand |
| Soort bediening | Rotary, Touch |
| Kleur van het product | Wit |
| Deurscharnieren | Links |
| Ingebouwd display | Ja |
