Siemens WG56B2A3GB handleiding

60 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 37 van 60
 en
37
1. Press and hold i-Dos1 for approx.
3 seconds.
a The display shows the set basic
dosage amount.
2. To adjust the setting, press / .
3. Wait briefly to save the setting.
Note:To set the basic dosage
amount for the other dispenser, re-
peat the steps with i-Dos2.
HomeConnect
16 HomeConnect
HomeConnect
This appliance is network-capable.
Connecting your appliance to a mo-
bile device lets you control its func-
tions via the HomeConnect app, ad-
just its basic settings and monitor its
operating status.
The HomeConnect services are not
available in every country. The avail-
ability of the HomeConnect function
depends on the availability of
HomeConnect services in your coun-
try. You can find information about
this at: www.home-connect.com.
The HomeConnect app guides you
through the entire login process. Fol-
low the instructions in the HomeCon-
nect app to configure the settings.
Tip:Please also follow the instruc-
tions in the HomeConnect app.
Notes
¡ Please note the safety precautions
in this instruction manual and
make sure that they are also ob-
served when operating the appli-
ance via the HomeConnect app.
→"Safety", Page4
¡ Operating the appliance on the ap-
pliance itself always takes priority.
During this time it is not possible
to operate the appliance using the
HomeConnect app.
16.1 Setting up the
HomeConnect app
1. Install the HomeConnect app on
your mobile device.
2. Start the HomeConnect app and
set up access for HomeConnect.
The HomeConnect app guides
you through the entire login pro-
cess.
16.2 Setting up HomeCon-
nect
Requirements
¡ The HomeConnectapp has been
installed on your mobile device.
¡ The appliance is receiving signals
from the WLAN home network (Wi-
Fi) at its installation location.
1. Press and hold Remote Start for
approx. 3seconds.
2. Follow the instructions in the
HomeConnect app.
16.3 Activating Wi-Fi on the
appliance
1. Press and hold Remote Start for
approx. 3seconds.
2. Press Remote Start repeatedly
until the display shows "oFF".
3. Press ⁠ to activate the Wi-Fi.
a The display shows "on".
Notes
¡ If the Wi-Fi is activated, the display
alternately shows "on" and the sig-
nal strength of the Wi-Fi connec-
tion.
¡ To exit the HomeConnect settings,
press and hold Remote Start for
approx. 3 seconds.

Bekijk gratis de handleiding van Siemens WG56B2A3GB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkSiemens
ModelWG56B2A3GB
CategorieWasmachine
TaalNederlands
Grootte5033 MB