Siemens WG56B2A3GB handleiding
Handleiding
Je bekijkt pagina 24 van 60
en
24
Button Selection More information
i-Dos1 ¡ Activate
¡ Deactivate
¡ Setting the ba-
sic dosage
amount
Briefly press the button to activate or
deactivate the intelligent dosing sys-
tem for liquid detergent .
Press and hold the button for approx.
3 seconds to set the basic dosage.
→Page36
i-Dos2 ¡ Activate
¡ Deactivate
¡ Adapting the
dispenser
¡ Setting the ba-
sic dosage
amount
Briefly press the button to activate or
deactivate the intelligent dosing sys-
tem for fabric softener or liquid de-
tergent .
Press the button for approximately 3
seconds to adapt the contents of the
/ dispenser or set the basic
dosage.
→"Intelligent dosing system",
Page35
Ready In Up to 24 hours Set the programme end time.
The programme duration is already in-
cluded in the set number of hours.
Once the programme has started, the
programme duration is displayed.
Note:Press or until the display
shows the required setting.
- 90 Adjust the temperature.
Set temperature in °C.
- 1600 Adjust the spin speed or activate
(Rinse Hold).
Set spin speed in rpm.
If is selected, the water is not
drained at the end of the washing
cycle and the spin cycle is deactiv-
ated. The laundry remains in the water
used for rinsing.
(mains switch) ¡ Switch on
¡ Standby mode
¡ Restart the ap-
pliance
Switch on the appliance or put it in
standby mode.
If the control panel does not respond,
press and hold for approximately
5seconds to restart the appliance.
→"The display and buttons do not re-
spond.", Page49
Bekijk gratis de handleiding van Siemens WG56B2A3GB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Siemens |
| Model | WG56B2A3GB |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 5033 MB |
