Siemens WG56B2A2GB handleiding
Handleiding
Je bekijkt pagina 14 van 60
en
14
¡
If four cover caps are included
in the scope of delivery, insert
the cover caps in the four open-
ings for the transit bolts.
¡
If one cover cap is included in
the scope of delivery, insert the
cover cap in the bottom left
opening for the transit bolt.
Note:To install the transit bolts to
transport the appliance, perform
these steps again in the reverse or-
der.
4.5 Connecting the appliance
Connecting the water inlet hose
ATTENTION!
Material damage may be caused if
the water inlet hose is connected in-
correctly.
▶ Tighten the screw connections on
the water inlet until they are hand-
tight.
1. Connect the water inlet hose.
2. Connect the water inlet hose to a
tap (26.4mm=3/4").
3. Open the water tap carefully and
check that the connection points
are tight.
Water outlet connection types
This information is intended to help
you to connect this appliance to the
water outlet.
ATTENTION!
When draining, the water outlet hose
is subject to water pressure and may
come loose from the installed con-
nection point.
▶ Secure the water outlet hose
against unintentional loosening.
Bekijk gratis de handleiding van Siemens WG56B2A2GB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Siemens |
| Model | WG56B2A2GB |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 5032 MB |
