Siemens WG44B2A9CH handleiding
Handleiding
Je bekijkt pagina 111 van 462
4.8 Replacing door seal
Caution
Sharp housing edges!
Cut injuries
▶ Wear protective gloves.
Caution
Risk of falling parts due to released screws!
Injury because of falling parts.
▶ Secure component from falling down.
Notice
Risk of falling parts due to released screws!
Damage to other parts of the appliance or at customers home e.g. bot-
tom.
▶ Secure component from falling down.
Prerequisite:
Appliance is disconnected from power supply.
Appliance is disconnected from water supply.
Appliances is freely accessible.
Worktop has been removed.→Page 103
Detergent drawer has been removed.→Page 104
Fascia panel has been removed.→Page 106
Door has been removed.→Page 108
Pump cover has been removed.→Page 110
Front panel has been removed.→Page 115
Drum light has been removed (optional).→Page 114
4.8.1 Removing door seal
1. Release all hose connections.
2. Remove door seal.
4.8.2 Installing door seal
Warning
Risk of falling parts due to incorrect installation!
Injury or damage to the appliance.
▶ Tighten tension ring of boot gasket with 3,4 Nm.
▶
Install in reverse order.
Repair
2023-09-05_8001214495 Copyright by BSH Hausgeräte GmbH Page111of462
Bekijk gratis de handleiding van Siemens WG44B2A9CH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Siemens |
| Model | WG44B2A9CH |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 93227 MB |
