Siemens SX97T801CE handleiding
Handleiding
Je bekijkt pagina 12 van 60
en Environmental protection and saving energy
12
During the drying phase, moisture
from the interior of the dishwasher is
stored in the mineral and heat energy
is released. The heat energy is blown
out into the interior of the dishwasher
with dry air. This speeds up and im-
proves drying.
Zeolith drying therefore saves a great
deal of energy.
Notes
¡ To avoid impairing Zeolith drying
performance, do not position table-
ware parts directly in front of the
intake opening or the blow open-
ing of the Zeolith container.
Do not position heat-sensitive
tableware parts directly in front of
the blow opening of the Zeolith
container.
→"Appliance", Page15
¡ To avoid thermal damage to the
appliance, remove any parts that
are not permanently installed from
the interior of the appliance.
4.4 Sensors
The sensors adjust the programme
sequence and strength in the auto-
matic programmes depending on the
level and type of soiling.
The sensor has different sensitivity
settings that can be changed in the
basic settings.
→"Changing basic settings",
Page41
Sensor set-
ting
Description
Standard Optimum setting for
a mixed load and
heavily soiled table-
ware. Saves both en-
ergy and water.
Sensor set-
ting
Description
Sensitive Adjusts the pro-
gramme strength for
effective removal of
food remnants even
with low soiling
levels. Energy and
water consumption
are adjusted accord-
ingly.
Very sensitive Adjusts the pro-
gramme strength for
difficult conditions of
use, e.g. stubborn
dried-on food rem-
nants. Recommen-
ded setting when us-
ing organic or ecolo-
gical detergents con-
taining low levels of
active agents. En-
ergy and water con-
sumption are adjus-
ted accordingly.
4.5 autoOpen Dry
The appliance door opens automatic-
ally during the drying phase. This en-
sures a particularly economical dry-
ing result.
For best drying results wait until the
end of programme before unloading
the tableware. The programme has
ended when the display shows "Fin-
ished".
If automatic door opening is deactiv-
ated, energy consumption increases
and the drying phase is usually
shortened.
→"Overview of basic settings",
Page38
If this additional function has been
selected, automatic door opening is
deactivated.
→"Additional functions", Page22
Bekijk gratis de handleiding van Siemens SX97T801CE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Siemens |
| Model | SX97T801CE |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 5926 MB |
