Showtec Xpression 2000B handleiding
Handleiding
Je bekijkt pagina 49 van 52
8.3. Corrective Maintenance
The device does not contain user-serviceable parts. Do not open the device and do not modify the device.
Refer repairs and servicing to instructed or skilled persons. Contact your Highlite International dealer for more
information.
8.3.1. Replacing the Fuse
DANGER
Electric shock caused by short-circuit
• Do not bypass the thermostatic switch or fuses.•
• Replace fuses only with the same type and rating.•
Power surges, short-circuit or incorrect electrical power supply may cause a fuse to burn out. If the fuse burns
out, the device will not function anymore. If this happens, follow the steps below:
01) Disconnect the device from the electrical power supply.01)
02) Allow the device to cool down for at least 15 minutes.02)
03) Loosen the fuse cover with a screwdriver and remove the fuse holder.03)
04) If the fuse is brown or unclear, it is burned out. Remove the old fuse.04)
05) Insert a new fuse in the fuse holder. Make sure that the type and the rating of the replacement fuse are the05)
same as the ones specified on the information label of the product.
06) Replace the fuse holder in the opening and tighten the fuse cover.06)
48
c
Product code: 47020
Xpression 2000B - Beam
Bekijk gratis de handleiding van Showtec Xpression 2000B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Showtec |
| Model | Xpression 2000B |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 6551 MB |
