Showtec Xpression 2000B handleiding
Handleiding
Je bekijkt pagina 36 van 52
6.6.3.3. DMX Fail
In this submenu you can determine the behavior of the device in case of a DMX failure.
01) Touch the UP/DOWN buttons to select one of the 4 options:01)
• Hold: The device will use the last properly received DMX signal•
• Manual: The device will switch to Manual mode (see 6.6.2.2. Manual on page 29)•
• Auto: The device will run the Auto programs (see 6.6.2.3. Auto on page 30)•
• Program: The device will run the Recorded programs (see 6.6.2.4. Program on page 30)•
02) Touch the ENTER button to confirm the selection.02)
6.6.3.4.
Fan
In this submenu you can adjust the fan settings.
01) Touch the UP/DOWN buttons to scroll through the 2 available options:01)
• Auto: The fan speed is automatic, depending on the selected light output•
• Full: The fan speed is full on•
02) Touch the ENTER button to confirm the selection.02)
6.6.4.
Info
In this menu you can view the currently installed firmware version, operation mode, DMX address and other
parameters of the device.
01)
Touch the UP/DOWN buttons to scroll through the 8 available options:
01)
• Version: Shows the current software version•
• Running Mode: Shows the current running mode•
• DMX Address: Shows the current DMX address•
• LED Temp: Shows the current LED temperature•
• Hours: Shows the total amount of hours the device has been running•
• Channels (see 6.6.4.1. Channels)•
• Errors (see 6.6.4.2. Errors)•
• RDM UID: Shows the current RDM UID address•
02) Touch the ENTER button to confirm the selection.02)
35
c
Product code: 47020
Xpression 2000B - Beam
Bekijk gratis de handleiding van Showtec Xpression 2000B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Showtec |
| Model | Xpression 2000B |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 6551 MB |
