Showtec Xpression 2000B handleiding
Handleiding
Je bekijkt pagina 29 van 52
6.6. Main Menu Options
The main menu has the following 5 options:
DMX Address (see 6.6.1. DMX Address on page 28)
Run Mode (see 6.6.2. Run Mode on page 28)
Setup (see 6.6.3. Setup on page 33)
Information (see 6.6.4. Info on page 35)
Service (see 6.6.5. Service on page 37)
01) Touch the LEFT/RIGHT/UP/DOWN buttons to navigate through the main menu.01)
02) Touch the ENTER button to open the submenus.02)
6.6.1.
DMX Address
In this menu you can set the DMX starting address of the device.
01)
Touch the UP/DOWN buttons to select the DMX starting address of the device. The selection range depends
01)
on the active DMX channel mode. The adjustment range is 001–499 (14 CH Mode) or 001–495 (18 CH
Mode). For more information about the channel mode, refer to DMX Mode (see 6.6.2.1. DMX on page 28).
02)
Touch the ENTER button to confirm the selection.
02)
6.6.2. Run Mode
In this menu you can select the control modes of the device.
01) Touch the UP/DOWN buttons to scroll through the 5 available options:01)
• DMX (see 6.6.2.1. DMX)•
• Manual (see 6.6.2.2. Manual)•
• Auto (see 6.6.2.3. Auto)•
• Program (see 6.6.2.4. Program)•
• Slave (see 6.6.2.5. Slave)•
02) Touch the ENTER button to confirm the selection.02)
6.6.2.1. DMX
In this submenu you can select the DMX channel mode.
01) Touch the UP/DOWN buttons to select the DMX channel mode. There are 2 options available:01)
• 14 channels•
• 18 channels•
02) Touch the ENTER button to confirm the selection. For more information, refer to DMX Channels.02)
28
c
Product code: 47020
Xpression 2000B - Beam
Bekijk gratis de handleiding van Showtec Xpression 2000B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Showtec |
| Model | Xpression 2000B |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 6551 MB |
