Showtec Xpression 2000B handleiding
Handleiding
Je bekijkt pagina 23 van 52
6.3. Control Panel
Figure 13
A) UP touch buttonA)
B) RIGHT touch buttonB)
C) DOWN touch buttonC)
D) ENTER touch buttonD)
E) LEFT touch buttonE)
F) LCD displayF)
• Use the LEFT button to exit the current submenu, to return to the Main Menu and to return to the start•
screen.
• Use the RIGHT button to navigate through the menus.•
• Use the UP/DOWN buttons to navigate through the menus or to increase/decrease numeric values.•
• Use the ENTER button to open the desired menu, to confirm your choice or to set the currently selected•
value.
6.4.
Start-up
After the device is connected to power supply, the device will perform a reset. During the reset the display
shows a splash screen with the Showtec logo and the name of the device:
Immediately afterwards, the display shows the start screen. The start screen provides information about the
current LED temperature and control mode of the device. For example:
Touch the ENTER button to enter the main menu.
Note:
If no button is pressed, after 60 seconds the display turns off. You can change this setting in the Display Time
submenu (see 6.6.3. Setup on page 33). If the DMX signal is lost, the display blinks.
22
c
Product code: 47020
Xpression 2000B - Beam
Bekijk gratis de handleiding van Showtec Xpression 2000B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Showtec |
| Model | Xpression 2000B |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 6551 MB |
