Showtec Xpression 2000B handleiding
Handleiding
Je bekijkt pagina 16 van 52
4. Installation
4.1. Safety Instructions for Installation
WARNING
Incorrect installation can cause serious injuries and damage of property.
If trussing systems are used, installation must be carried out only by instructed or skilled persons.
Follow all applicable European, national and local safety regulations concerning rigging and trussing.
4.2. Personal Protective Equipment
During installation, deinstallation and rigging wear personal protective equipment in compliance with the
national and site-specific regulations.
4.3.
Installation Site Requirements
• The device can be used only indoors.•
• The minimum distance to other objects must be bigger than 0,5 m.•
• The maximum ambient temperature t
a
= 40 °C must never be exceeded.•
• The relative humidity must not exceed 50 % with an ambient temperature of 40 °C.•
4.4.
Rigging
The device can be positioned on a flat surface or mounted to a truss or other rigging structure in any
orientation. Make sure that all loads are within the pre-determined limits of the supporting structure.
CAUTION
Restrict the access under the work area during rigging/derigging.
To mount the device, follow the steps below:
01) Fasten the 2 quick-lock brackets, supplied with the device, on the mounting holes for quick-lock01)
brackets(10). You can position the quick-lock brackets in 2 ways.
02) Lock the 2 quick-lock brackets by turning the locking mechanism of the quick-lock brackets clockwise.02)
Figure 8
15
c
Product code: 47020
Xpression 2000B - Beam
Bekijk gratis de handleiding van Showtec Xpression 2000B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Showtec |
| Model | Xpression 2000B |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 6551 MB |
