Showtec Titan FLEX FX Controller handleiding

Verlichting

Showtec

52 pagina's

PDF beschikbaar

Handleiding

WARNING

Risk of burns due to hot surface

The surface and the inner parts of the device can become very hot during operation.

• Do not touch the device during operation.•

• Allow the device to cool down for at least 15 minutes before handling.•

Attention

Power supply

• Before connecting the device to the power supply, make sure that the current, voltage and frequency•

match the input voltage, current and frequency specified on the information label on the device.

• Make sure that the cross-sectional area of the extension cords and power cables is sufficient for the•

required power consumption of the device.

Attention

General safety



• Do not shake the device. Avoid brute force when installing or operating the device.•

• If the device is dropped or struck, disconnect the device from the electrical power supply immediately.•

• If the device is exposed to extreme temperature variations (e.g. after transportation), do not switch it on•

immediately. Let the device reach room temperature before switching it on, otherwise it may be damaged

by the formed condensation.

• If the device fails to work properly, discontinue use immediately.•

Attention

Before each use, examine the device visually for any defects.

Make sure that:

• All screws used for installing the device or parts of the device are tightly fastened and are not corroded.•

• The safety devices are not damaged.•

• There are no deformations on housings, fixings and installation points.•

•

The power cables are not damaged and do not show any material fatigue.

•

Attention

For professional use only

This device must be used only for the purposes it is designed for.

This device is designed to be used as a controller. Any incorrect use may lead to hazardous situations and result

in injuries and material damage.

•

This device is not suitable for households.

•

This device does not contain user-serviceable parts. Unauthorized modifications to the device will render

•

the warranty void. Such modifications may result in injuries and material damage.

Product code: 40306

Controller for Titan Strobe FLEX FX

Bekijk gratis de handleiding van Showtec Titan FLEX FX Controller, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.