Showtec Titan FLEX FX Controller handleiding

Verlichting

Showtec

52 pagina's

PDF beschikbaar

Handleiding

6.6. Main Menu Options

The main menu has the following options:

1. DMX

2. NetWork Configuration

3. Manual

4. Auto

5. Program

6. Slave

7. Setting

8. Information

01) Press the UP/DOWN buttons to navigate through the menu.01)

02) Press the SET button to open submenus.02)

6.6.1. DMX

In this menu you can configure the DMX settings of the device.

01) Press the UP/DOWN buttons to select one of the 2 options:01)

• Address

(see 6.6.1.1. Address)

•

• Channels

(see 6.6.1.2. Channels)

•

02)

Press the SET button to confirm the selection.

02)

6.6.1.1. Address

In this submenu you can set the DMX starting address of the device (see 5.3.5. DMX Addressing on page 19).

01) Press the UP/DOWN buttons to select the DMX starting address. The selection range is 001–512.01)

02) Press the SET button to confirm the selection.02)

6.6.1.2. Channels

In this submenu you can select the DMX channel mode. For more information to DMX Channels.

01) Press the UP/DOWN buttons to select a DMX channel mode. There are 8 options:01)

• 004: 4 channels (Strobe All)•

• 032: 32 channels (Strobe POD)•

• 008: 8 channels (Basic All)•

• 064: 64 channels (Basic POD)•

• 052: 52 channels (Pixel All)•

• 416: 416 channels (Pixel POD)•

• 011: 11 channels (FX All)•

• 088: 88 channels (FX POD)•

02) Press the SET button to confirm the selection.02)

Product code: 40306

Controller for Titan Strobe FLEX FX

Bekijk gratis de handleiding van Showtec Titan FLEX FX Controller, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.