Showtec Titan FLEX FX Controller handleiding
Handleiding
Je bekijkt pagina 17 van 52
4.7. Power Linking of Multiple Devices
This device supports power linking. Power can be relayed to another device via the power OUT connector.
Note that the input and the output connectors have different designs: one type cannot be connected to the
other.
Power linking of multiple devices must be carried out only by instructed or skilled persons.
WARNING
Incorrect power linking may lead to overload of the electrical circuit and result in serious
injuries and damage of property.
To prevent overload of the electrical circuit, when power linking multiple devices:
•
Use cables with sufficient current-carrying capacity. The power cable supplied with the device is not
•
suitable for power linking of multiple devices.
•
Make sure that the total current draw of the device and all connected devices does not exceed the rated
•
capacity of the power cables and the circuit breaker.
•
Do not link more devices on one power link than the maximum recommended number.
•
The maximum recommended number of devices depends on the total load of all connected pods and
Controller for Titan Strobe FLEX FX devices.
The total load shall not exceed:
• at 120 V: 1800 W•
• at 230 V: 3500 W•
16
c
Product code: 40306
Controller for Titan Strobe FLEX FX
Bekijk gratis de handleiding van Showtec Titan FLEX FX Controller, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Showtec |
| Model | Titan FLEX FX Controller |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 6501 MB |
