Showtec Sonus Bar 4B handleiding
Handleiding
Je bekijkt pagina 31 van 44
6.8.3.4. IR Color Mode
01) Press the DIMMING button to activate the IR color mode.01)
02) Press one of the R/G/B/W buttons to select the respective LEDs.02)
03) Press the + (plus) or - (minus) buttons to adjust the color intensity. You can view the adjustments on the 7-03)
segment display (A). The adjustment range is 000–255 (in intervals of 5), from low to high intensity.
6.8.3.5.
IR Preset Colors
Press the 0, 1, 2, 3, 4, 5, 6, 7, 8, or 9 button to select one of the preset colors. For more information about the
preset colors, refer to Functions of the Remote Control Buttons (see
6.8.2. Functions of the Remote Control
Buttons on page 28).
6.8.3.6. IR Strobe
You can add strobe effect:
•
to IR Auto mode (see 6.8.3.1. IR Auto Mode)
•
•
to IR Program mode (see 6.8.3.2. IR Program Mode)
•
•
to IR Sound mode (see 6.8.3.3. IR Sound Mode)
•
•
to IR Color mode (see 6.8.3.4. IR Color Mode)
•
•
to IR Preset Colors (see 6.8.3.5. IR Preset Colors)
•
To add strobe effect:
01) Press the STROBE button.01)
02) Press the + (plus) or - (minus) buttons to increase or decrease the strobe frequency. You can view the02)
adjustments on the 7-segment display (A). The adjustment range is 00–95 and 99 (in intervals of 5), from low
to high frequency.
03) Press the STROBE button again to stop the strobe effect.03)
6.8.3.7. IR Factory Reset
You can reset the settings of the device to the default factory settings with the remote control.
Press and hold down the ON/OFF button and then press continuously buttons 9, 8 and 7 in this order.
30
c
Product code: 41275
Sonus Bar 4B
Bekijk gratis de handleiding van Showtec Sonus Bar 4B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Showtec |
| Model | Sonus Bar 4B |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4374 MB |
