Showtec Single Strip for Octostrip FLEX – 0,5M handleiding
Handleiding
Je bekijkt pagina 17 van 20
7. Maintenance
7.1. Safety Instructions for Maintenance
DANGER
Electric shock caused by dangerous voltage inside
Disconnect power supply before servicing or cleaning.
7.2. Preventive Maintenance
Attention
Before each use, examine the device visually for any defects.
Make sure that:
• All screws used for installing the device or parts of the device are tightly fastened and are not corroded.•
• The safety devices are not damaged.•
• There are no deformations on housings, fixings and installation points.•
• The power cables are not damaged and do not show any material fatigue.•
7.2.1. Basic Cleaning Instructions
To clean the device, follow the steps below:
01) Disconnect the device from the electrical power supply.01)
02) Allow the device to cool down for at least 5 minutes.02)
03) Remove the dust collected on the external surface with dry compressed air and a soft brush.03)
Attention
•
Do not immerse the device in liquid.
•
•
Do not use alcohol or solvents.
•
7.3.
Corrective Maintenance
The device does not contain user-serviceable parts. Do not open the device and do not modify the device.
Refer repairs and servicing to instructed or skilled persons. Contact your Highlite International dealer for more
information.
16
c
Product code: 42242
Single Strip for Octostrip FLEX – 0,5M
Bekijk gratis de handleiding van Showtec Single Strip for Octostrip FLEX – 0,5M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Showtec |
| Model | Single Strip for Octostrip FLEX – 0,5M |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 1947 MB |
