Showtec Performer Fresnel 2200 DDT handleiding

Verlichting

Showtec

40 pagina's

PDF beschikbaar

Handleiding

8.3.1. Replacing the Fuse

DANGER

Electric shock caused by short-circuit

• Do not bypass the thermostatic switch or fuses.•

• Replace fuses only with the same type and rating.•

Power surges, short-circuit or incorrect electrical power supply may cause a fuse to burn out. If the fuse burns

out, the device will not function anymore. If this happens, follow the steps below:

01) Disconnect the device from the electrical power supply.01)

02) Allow the device to cool down for at least 15 minutes.02)

03) Loosen the fuse cover manually and remove the fuse holder.03)

04) If the fuse is brown or unclear, it is burned out. Remove the old fuse.04)

05) Insert a new fuse in the fuse holder. Make sure that the type and the rating of the replacement fuse are the05)

same as the ones specified on the information label of the product.

06) Replace the fuse holder in the opening and tighten the fuse cover.06)

9. Deinstallation, Transportation and Storage

9.1.

Instructions for Deinstallation

WARNING

Incorrect deinstallation can cause serious injuries and damage of property.

• Let the device cool down before dismounting.•

• Disconnect power supply before deinstallation.•

• Always observe the national and site-specific regulations during deinstallation and derigging of the device.•

• Wear personal protective equipment in compliance with the national and site-specific regulations.•

9.2.

Instructions for Transportation

•

Use the original packaging to transport the device, if possible.

•

Always observe the handling instructions printed on the outer carton box, for example: "Handle with care",

•

"This side up", "Fragile".

9.3.

Storage

• Clean the device before storing. (see 8.2.1. Basic Cleaning Instructions on page 33)•

• Store the device in the original packaging, if possible.•

10.

Disposal

Correct disposal of this product

Waste Electrical and Electronic Equipment

This symbol on the product, its packaging or documents indicates that the product shall not

be treated as household waste. Dispose of this product by handing it to the respective

collection point for recycling of electrical and electronic equipment. This is to avoid

environmental damage or personal injury due to uncontrolled waste disposal. For more

detailed information about recycling of this product contact the local authorities or the

authorized dealer.

Product code: 33045

Performer Fresnel 2200 DDT

Bekijk gratis de handleiding van Showtec Performer Fresnel 2200 DDT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.