Showtec Melodist Mobile handleiding
Handleiding
Je bekijkt pagina 25 van 28

7. Troubleshooting
This troubleshooting guide contains solutions to problems which can be carried out by an ordinary person. The
device does not contain user-serviceable parts.
Unauthorized modifications to the device will render the warranty void. Such modifications may result in injuries
and material damage.
Refer servicing to instructed or skilled persons. Contact your Highlite International dealer in case the solution is
not described in the table.
Problem Probable cause(s) Solution
The device does not
function at all
No power to the device
• Check if power is switched on and•
cables are plugged in
The device does not
respond to DMX control
The controller is not connected • Connect the controller•
The signal is reversed. The 5-pin
DMX OUT of the controller does
not match the DMX IN of the
device
• Install a phase-reversing cable between•
the controller and the device
The controller is defective • Try using another controller•
The device responds
erratically to DMX control
Bad data link connection
• Examine connections and cables.•
Correct poor connections. Repair or
replace damaged cables
The data link is not terminated with
a 120 Ω termination plug
• Insert a termination plug in the DMX OUT•
connector of the last device on the link
Incorrect addressing
• Check address settings and correct, if•
necessary
In case of a setup with multiple
devices, one of the devices is
defective and disturbs data
transmission on the link
• To find out the defective device, bypass•
one device at a time until normal
operation is restored
24
c
Product code: 50422
Melodist Mobile
Bekijk gratis de handleiding van Showtec Melodist Mobile, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Showtec |
Model | Melodist Mobile |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 2846 MB |