Showtec Melodist Install handleiding
Handleiding
Je bekijkt pagina 22 van 32
6.7.2. DMX Mode
In this submenu you can select the DMX channel mode.
01) Press the UP/DOWN buttons to select the DMX channel mode. There are 2 options available:01)
• 11-ch trigger (11 DMX channels) (see 6.2.1. Trigger Mode on page 18)•
• 5-ch player (5 DMX channels) (see 6.2.2. Player Mode on page 18)•
02) Press the MENU button to return to the main menu.02)
6.7.3. Trigger inputs
In this submenu you can select the trigger input mode.
01) Press the UP/DOWN buttons to select the trigger input mode. There are 2 options available:01)
• single trigger:
An active trigger will play the selected audio file 1 time from start to finish
•
• on/off trigger:
An active trigger will play the selected audio file. If the trigger signal stops, the
•
playback of the audio file will stop. If the trigger is active longer than the length of
the audio file, the playback of the audio file will be repeated
02)
Press the MENU button to return to the main menu.
02)
6.7.4. Display
In this submenu you can adjust the display settings of the device and view the firmware version.
01) Press the UP/DOWN buttons to select the display setting. There are 2 options available:01)
• on: The display stays on•
• auto off: The display turns off automatically after 30 seconds of inactivity•
02) Press the MENU button to return to the main menu.02)
21
c
Product code: 50421
Melodist Install
Bekijk gratis de handleiding van Showtec Melodist Install, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Showtec |
| Model | Melodist Install |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3106 MB |
