Showtec EventLITE 4/10 Q6 handleiding

36 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 5 van 36
1. Introduction
1.1. Before Using the Product
Important
Read and follow the instructions in this user manual before installing, operating or servicing
this product.
The manufacturer will not accept liability for any resulting damages caused by the non-observance of this
manual.
After unpacking, check the contents of the box. If any parts are missing or damaged, contact your Highlite
International dealer.
Your shipment includes:
Figure 1
Showtec EventLITE 4/10 Q6
Schuko to IEC power cable (1,5 m)
User manual
1.2.
Intended Use
This device is intended for professional use as a battery-powered spotlight. It can be installed indoors and
outdoors. This device is not suitable for households and for general lighting.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
1.3.
LEDs Lifespan
The light output of the LEDs gradually decreases over time (lumen depreciation). High operating temperatures
contribute to this process. You can extend the lifespan of the LEDs by providing adequate ventilation and
operating the LEDs at the lowest possible brightness.
1.4.
Text Conventions
Throughout the user manual the following text conventions are used:
Buttons: All buttons are in bold lettering, for example "Press the UP/DOWN buttons"
References: References to parts of the device are in bold lettering, for example: "turn the adjustment
handle (05)". References to chapters are hyperlinked
0–255: Defines a range of values
Notes: Note: (in bold lettering) is followed by useful information or tips
4
c
Product code: 44067
EventLITE 4/10 Q6

Bekijk gratis de handleiding van Showtec EventLITE 4/10 Q6, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkShowtec
ModelEventLITE 4/10 Q6
CategorieVerlichting
TaalNederlands
Grootte3852 MB