Showtec Airdrive 2.4 Stick handleiding
Handleiding
Je bekijkt pagina 11 van 20
4. Setup and Operation
4.1. Setup Example
The Airdrive 2.4 Stick, 5-pin XLR can be used in combination with a transmitter device that supports the Wireless
DMX or LumenRadio protocols.
Figure 4
To wirelessly connect one or more devices, follow the steps below:
01) Connect a controller device to a transmitter device.01)
02) Make sure that the Airdrive 2.4 Stick, 5-pin XLR is disconnected from any previous transmitter devices (see02)
4.5. Disconnecting the Device from a Transmitter on page 14). The LED indicator (02) should light up white.
03) Connect the 5-pin DMX XLR connector OUT (06) to the 5-pin DMX XLR connector IN of the lighting device.03)
04) Repeat step 2 to connect multiple devices in the setup.04)
05) Start the linking procedure on the transmitter device to establish a connection with the Airdrive 2.4 Stick, 5-05)
pin XLR.
The signal from the transmitter device is now sent to the devices connected to the Airdrive 2.4 Stick, 5-pin XLR.
10
c
Product code: 50280
Airdrive 2.4 Stick, 5-pin XLR
Bekijk gratis de handleiding van Showtec Airdrive 2.4 Stick, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Showtec |
| Model | Airdrive 2.4 Stick |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1926 MB |
