Showtec AirDrive 2.4 IP handleiding
Handleiding
Je bekijkt pagina 7 van 28
Attention
Power supply
• Before connecting the device to the power supply, make sure that the current, voltage and frequency•
match the input voltage, current and frequency specified on the information label on the device.
• Make sure that the cross-sectional area of the extension cords and power cables is sufficient for the•
required power consumption of the device.
Attention
General safety
• Do not shake the device. Avoid brute force when installing or operating the device.•
• If the device is dropped or struck, disconnect the device from the electrical power supply immediately.•
• If the device is exposed to extreme temperature variations (e.g. after transportation), do not switch it on•
immediately. Let the device reach room temperature before switching it on, otherwise it may be damaged
by the formed condensation.
• If the device fails to work properly, discontinue use immediately.•
Attention
For professional use only
This device must be used only for the purposes it is designed for.
This device is designed to be used as a DMX-512 transceiver and booster/splitter. Any incorrect use may lead to
hazardous situations and result in injuries and material damage.
• This device is not suitable for households.•
• This device does not contain user-serviceable parts. Unauthorized modifications to the device will render•
the warranty void. Such modifications may result in injuries and material damage.
Attention
Before each use, examine the device visually for any defects.
Make sure that:
• All screws used for installing the device or parts of the device are tightly fastened and are not corroded.•
•
There are no deformations on housings, fixings and installation points.
•
• The power cables are not damaged and do not show any material fatigue.•
Attention
Do not expose the device to conditions that exceed the rated IP class conditions.
This device is IP65 rated. IP (Ingress Protection) 65 class means that the device is dust-tight and protected
against harmful effect of water jets.
Keep the connectors sealed with the rubber caps when the connectors are not in use.
6
c
Product code: 50266
AirDrive 2.4 IP, 3-pin XLR
Bekijk gratis de handleiding van Showtec AirDrive 2.4 IP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Showtec |
| Model | AirDrive 2.4 IP |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4009 MB |
