Showtec ACT Par 200W RGBAL handleiding
Handleiding
Je bekijkt pagina 8 van 40
WARNING
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe
lights.
Attention
Power supply
• Before connecting the device to the power supply, make sure that the current, voltage and frequency•
match the input voltage, current and frequency specified on the information label on the device.
• Make sure that the cross-sectional area of the extension cords and power cables is sufficient for the•
required power consumption of the device.
Attention
General safety
• Do not insert objects into air vents.•
• Do not connect the device to a dimmer pack.•
• Do not switch the device on and off in short intervals. This reduces the device’s life.•
• Do not shake the device. Avoid brute force when installing or operating the device.•
• Change the lens or the LEDs if they are visibly damaged to such an extent that their effectiveness is•
impaired, for example by cracks or deep scratches.Contact your Highlite International dealer for more
information, as servicing can be performed only by instructed or skilled persons.
• If the device is dropped or struck, disconnect the device from the electrical power supply immediately.•
• If the device is exposed to extreme temperature variations (e.g. after transportation), do not switch it on•
immediately. Let the device reach room temperature before switching it on, otherwise it may be damaged
by the formed condensation.
• If the device fails to work properly, discontinue use immediately.•
Attention
For professional use only
This device must be used only for the purposes it is designed for.
This device is intended for professional use as a theater spotlight. Any incorrect use may lead to hazardous
situations and result in injuries and material damage.
• This device is not suitable for households and for general lighting.•
• This device is not designed for permanent operation.•
• This device does not contain user-serviceable parts. Unauthorized modifications to the device will render•
the warranty void. Such modifications may result in injuries and material damage.
Attention
Before each use, examine the device visually for any defects.
Make sure that:
•
All screws used for installing the device or parts of the device are tightly fastened and are not corroded.
•
•
The safety devices are not damaged.
•
•
There are no deformations on housings, fixings and installation points.
•
•
The lens is not cracked or damaged.
•
•
The power cables are not damaged and do not show any material fatigue.
•
7
c
Product code: 34065
ACT Par 200W RGBAL
Bekijk gratis de handleiding van Showtec ACT Par 200W RGBAL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Showtec |
| Model | ACT Par 200W RGBAL |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 5061 MB |
