Showtec ACT Par 200W RGBAL handleiding
Handleiding
Je bekijkt pagina 27 van 40
6.6.4. Fixture Settings
In this menu you can adjust the fixture settings.
01) Press the UP/DOWN buttons to select one of the following 3 options:01)
• Dimmer Curve: There are 4 options available: Linear, Square Law, Inverse Square Law and S-•
Curve
• Dimmer Speed: There are 2 options available: LED (instant dimming without delay) and Halogen•
(delayed dimming, imitating the behavior of a halogen lamp)
• White Balance: You can adjust the white balance of the LEDs through adjusting the values of the•
red, green, and blue colors. The adjustment range is 125–255
02) Press the ENTER button to confirm the selection.02)
6.6.5. Display Settings
In this menu you can adjust the display settings of the device.
01) Press the UP/DOWN buttons to select one of the following 3 options:01)
• Display Inverse: The OLED display is rotated at 180° (Yes/No)•
• Backlight Auto Off: The backlight of the OLED display does not turn off automatically after 30•
seconds of inactivity (Yes/No)
• Display Contrast: The adjustment range is 01-30 (from low to high contrast)•
02) Press the ENTER button to confirm the selection and open the pop-up submenu where you can adjust the02)
settings.
03) Press the UP/DOWN buttons to select the desired setting.03)
04) Press the ENTER button to confirm the selection.04)
26
c
Product code: 34065
ACT Par 200W RGBAL
Bekijk gratis de handleiding van Showtec ACT Par 200W RGBAL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Showtec |
| Model | ACT Par 200W RGBAL |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 5061 MB |
