Handleiding
Je bekijkt pagina 14 van 136
EN -12-
CHAPTER -3: USING YOUR FRIDGE FREEZER
Accessories
Icematic (In some models)
• Take out the ice making tray
• Fill the water to the line.
• Place the ice making tray in its original position
• When ice cubes are formed, twist the lever to drop ice cubes into the icebox.
Note:
• Do not ll the icebox with water in order to make ice. It may be broken.
• The movement of the ice maker may be dicult while the refrigerator is running. In such a case, it should be
cleaned after removing the glass shelves.
Removing the ice maker
• Take out the glass shelves of freezer compartment
• Remove the icemaker by moving it to left or right on the shelf.
You can remove the icemaker to create a larger volume of the freezer compartment.
Zero Degree Zone (In some models)
Keeping food in the chill drawer instead of the freezer or refrigerator compartment
allows food retain freshness and avour longer while preserving its fresh
appearance. If the chill drawer tray becomes dirty, remove it and wash with water.
(Water freezes at 0 °C, but foods containing salt or sugar require lowered
temperatures to freeze)
Normally people use the chill drawer for raw sh, rice, etc...
Do not put foods you want to freeze or ice trays in order to make ice.
Removing the chill drawer
• Pull the chill drawer out toward you by sliding it on rails.
• Pull the chill drawer up from the rail to remove.
Putting food in the coldest area of the refrigerator
Your foods will be better stored if you put them in the most appropriate
cooling area. The coldest area is just above the crisper.
The following symbol indicates the coldest area of your refrigerator.
To ensure a low temperature in this area, make sure the shelf is located at
the the same level as this symbol, as shown in the illustration.
The upper limit of the coldest area is indicated by the lower side of the sticker (head of
the arrow). The coldest area upper shelf must be at the same level with the arrow head.
The coldest area is below this level.
As these shelves are removable, make sure they are always at the same level with these
zone limits described on the stickers, in order to guarantee temperatures in this area.
Fresh dial (In some models)
If you want to keep your vegetables longer in that compartment, you have
to change the humidty controller that is located at the front of the crisper,
to closed position. With the aid of this function, humidty level in the crisper
compartment, will stay constant and vegetables will last longer.
If you want to keep your vegetables colder in that compartment, you have to
change the humidity controller to open position. By doing this change, you
will allow the cold air to enter the crisper compartment. As a result of this,
your vegetables will be colder.
If you see any condensation on the glass shelf that is located at the top of
crisper, you can change the humidity controller to open position.
Bekijk gratis de handleiding van Sharp SJ-NTA35CHDIE-EU, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sharp |
| Model | SJ-NTA35CHDIE-EU |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 13904 MB |
