Sharp SDW6726MS handleiding
Handleiding
Je bekijkt pagina 20 van 20
20
ERROR CODES
When some malfunctions occur, the appliance will display error codes to warn you:
CODES MEANINGS POSSIBLE CAUSES
E1 • Longer inlet time • Faucet is not opened, or water intake is restricted, or water pressure is
too low
• Improper or Incomplete Draining • Drain Hose is extended more than 10 ft from Dishwasher
• Drain Hose is not properly looped underneath sink, or not installed
with Air Gap
• Drain Hose is kinked, compressed, or otherwise damaged
• Wrong Drain Hose used (use only supplied Sharp Dishwasher Drain
Hose)
E4 Overow Some element of dishwasher leaks
E8 Failure of orientation of distributary valve Open circuit or break of distributary valve
E9 Holding a button for longer than 30 seconds Water or some other material on the button
WARNING
• If overow occurs, turn off the main water supply before calling for service.
• If there is water in the base pan because of an overll or small leak, the water should be removed before restarting the dishwasher.
INCORRECT CORRECT - METHOD 1
AIR GAP WITH WASTE TEE OR DISPOSER
INCORRECT CORRECT - METHOD 2
HIGH DRAIN LOOP WITH WASTE TEE OR DISPOSER
SHARP ELECTRONICS CORPORATION • 100 Paragon Drive • Montvale, New Jersey 07645 • USA
August 30 2024
Bekijk gratis de handleiding van Sharp SDW6726MS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sharp |
| Model | SDW6726MS |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 5911 MB |
