Sharp PN-UN553S handleiding
Handleiding
Je bekijkt pagina 11 van 124
English
6
Setup Overview
1� Determine the installation location
CAUTION: • Before installing this monitor, turn it on and check the display�
• Installing your monitor must be done by a qualied technician.
Contact your supplier for more information�
• MOVING OR INSTALLING THE MONITOR MUST BE DONE BY TWO OR MORE PEOPLE� Failure to
follow this caution may result in injury if the monitor falls�
• This monitor has internal temperature sensors and cooling fans, including a fan for the Option Board�
If the monitor becomes too hot, the cooling fans will turn on automatically�
The Option Board’s fan is active although the temperature is lower than normal operating temperature
for cooling the Option Board� If the monitor overheats while the cooling fan is running, a “Caution”
warning appears� If the “Caution” warning appears, stop using the unit, turn off the power and allow it
to cool� Using the cooling fans will reduce the likelihood of early unit failure and may help reduce image
degradation and “Image Persistence”�
If the monitor is used in an enclosed area or if the LCD panel is covered with a protective screen,
please check the inside temperature of the monitor by using the HEAT STATUS control in the OSD
(see page 112)� If the temperature is higher than the normal operating temperature, please turn the
cooling fan to [ON] within the [FAN CONTROL] menu within the OSD (see page 112)�
NOTE: To avoid scratching the LCD panel, always place a soft cloth, such as a blanket that is larger than the monitor’s
screen area, on the table before laying the monitor face down�
2� Install the remote control (Optional) batteries
1� Press the cover gently and slide it in the direction of the arrow�
2� See the instructions in the compartment and put in the batteries (R03 or LR03 (“AAA” size) x 2) with their plus (+) and
minus (-) sides oriented correctly�
3� Close the cover�
SHARP recommends the following battery use:
CAUTION: Incorrect usage of batteries can result in leaks or bursting�
• Place “AAA” size batteries matching the (+) and (-) signs on each battery to the (+) and (-) signs of the battery
compartment�
• Do not mix battery brands�
• Do not combine new and old batteries� This can shorten battery life or cause liquid leakage of batteries�
• Remove dead batteries immediately to prevent battery acid from leaking into the battery compartment�
• Do not touch exposed battery acid, it may injure your skin�
NOTE: If you do not intend to use the Remote Control for a long period of time, remove the batteries�
3� Connect external equipment (See page 21)
• To protect the external equipment, turn off the main power before making connections�
• Refer to the manual of your equipment for further information�
NOTE: Do not connect/disconnect cables when turning on the monitor or other external equipment as this may result in
loss of image�
Bekijk gratis de handleiding van Sharp PN-UN553S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sharp |
| Model | PN-UN553S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13853 MB |
