Sharp MultiSync ME862 handleiding

75 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 69 van 75
English−69
Mounting Precautions
(For SHARP dealers and service engineers)
Please read “Important Information” carefully before installation.
Mounting the monitor requires expertise and the work must be carefully performed by a trained service person in accordance
with the section.
Mounting (for Trained Installers)
Carefully inspect the location where the unit is to be mounted. Not all walls or ceilings are capable of supporting the weight
of the unit. The weight of this monitor is provided in the specications (see “Product Specications” on page 52). Product
warranty does not cover damage caused by improper installation, re-modeling, or natural disasters. Failure to comply with these
recommendations could result in voiding the warranty.
To ensure safe installation, use two or more brackets to mount the unit. Mount the unit to at least two points on the installation
location.
Allow for adequate ventilation or provide air conditioning around the monitor, so that heat can properly dissipate away from the
monitor and from the mounting equipment.
Please note the following when mounting on a wall or ceiling:
We recommend mounting interfaces that comply with UL1678 standard in North America.
For detailed information, refer to the instructions included with the mounting equipment.
We strongly recommend using the screws as shown below.
If using screws longer than below mentioned, check the depth of the hole.
Screw Size Bracket Hole No Thread
Recommended Fasten Force
(A) (B) (C) (D)
ME982
M8 (4 pcs)
12~16 mm
≤ Ø 12 mm
1 mm
950-1600 N•cm
ME862
12~18 mm
ME752
ME652
8~14 mm
ME552
M6 (4 pcs) Ø 8.5 mm 390-670 N•cmME502
ME432
NOTE:   When used in a video wall conguration for a long time, slight expansion of the monitors may happen due to
temperature changes. It is recommended that a gap of over one millimeter is kept between adjacent monitor edges.
> 1 mm
> 1 mm
A
Unit
C
Washers
Mounting
Bracket
No thread
D
Thickness of
bracket and
washers
B
Gap
Gap

Bekijk gratis de handleiding van Sharp MultiSync ME862, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkSharp
ModelMultiSync ME862
CategorieMonitor
TaalNederlands
Grootte7928 MB