Handleiding
Je bekijkt pagina 20 van 75
English−20
Turning Power On/Off
The Main Power switch must be in the ON position in order to power up the monitor using the POWER ON button on the remote
control or the POWER button on the Control Panel.
⏻ Button
Main Power Switch
ON OFF
nOperations after rst power-on
When you turn on the power for the rst time, the initial setting screen appears. Navigate the cursor to [Start] using the
▲/▼ buttons on the remote control and press the SET button to start. Congure the initial settings, such as setting the
language, date and time, etc.
Power ON and OFF
Press the ⏻ button on the Control Panel or POWER ON button on the remote control to turn on the monitor.
Press the POWER button again on the monitor or press the STANDBY button on the remote control. The power is turned off.
(Standby state)
The monitor’s power LED indicates the current status of the monitor. Please refer to the following table for information about the
power indicator.
Power indicator status
and lighting pattern
Condition Recovery
Glowing blue Normal 1. Turn on the monitor using the remote
control or the monitor button.
2. Send an AV signal input to the monitor.
Blinking green*
1
Under any of the conditions below, no input signal has
been detected by the monitor during the period of time
you set:
• Connecting a cable to the USB Type-C port and [USB
Power] is set to [Auto].
• [USB Power] is set to [On].
• [Auto Input Change] is set to a setting except for
[None].
• [Quick Start] is enable.
• Under the [Lock Settings], [Key] or [Key & IR] is set
to [Select] and [All Lock] or [Custom Lock] is set to
[Mode].
*
1
: Time setting for auto power save is available at [Power Save Settings] (See page 64).
*
2
: [Mode] in [Power Save Settings] is set to [Normal].
Bekijk gratis de handleiding van Sharp MultiSync ME862, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sharp |
| Model | MultiSync ME862 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 7928 MB |
