Handleiding
Je bekijkt pagina 65 van 75
English−65
Protect
All Lock Locks all buttons.
Custom Lock All buttons are locked except for those that can be individually unlocked for custom settings.
See page 39 and page 40.
Advanced
User Apps Installation Sets whether or not to allow installation of apk application les.
NOTE: • 3rd party applications of this type are not guaranteed to work and are outside the scope of
support and warranty.
• Always verify the authenticity and safety of an application before installation.
Some applications may affect the operation of other applications and of this monitor.
Virus infections or, data corruption, falsication, or theft is possible.
Application Lock Sets whether or not to lock the use of the following applications.
Enables or disables the availability of some of the monitor’s pre-installed applications. When enabled, all
the following applications are locked and cannot be used:
• Updater
• Web Browser
Enable USB Drive Sets whether or not to allow the use of a USB ash drive.
Delay Time Delays the monitor from turning on for the amount of time set when the POWER ON button is pressed.
The delay can be set between 0 and 50 seconds.
Reset Resets all security menu settings back to factory setting, except for [Delay Time] and [Security Settings].
Setup
Setup
App Icon Layout Sets the icons of the applications to be arranged on the home screen.
PIP TIP: • This function is released when turning off the main power switch.
PIP Enable Displays a sub-screen inside a main screen.
TIP: • PIP is only available for use in the Android source for its main screen.
• This function is available only when [Screen Rotation] is set to [Landscape].
PIP Source Selects the input signal of the sub-screen: [HDMI1]/[HDMI2]/[HDMI3]/[USB-C].
PIP Position Selects the position of the sub-screen: [Top-Left]/[Top-Right]/[Bottom-Left]/[Bottom-Right].
PIP Size Selects the size of the sub-screen: [Small]/[Medium]/[Large].
Tile Matrix TIP: • This function is not available when the HOME screen is shown.
Tile Matrix Allows one image to be expanded and shown over multiple screens (up to 25) through a distribution
amplier.
H Monitors Number of monitors arranged horizontally.
V Monitors Number of monitors arranged vertically.
Position Sets the section of the tiled image to view on the current monitor.
Tile Comp Adjusts the image to compensate for the gap between monitors.
Human Sensing*
1
Automatically adjusts the backlight and volume levels based on whether or not a human presence is
detected in front of the monitor.
TIP: • Human sensing is automatically disabled if [Auto Input Change] is set while [Human Sensing] is
active.
• [Power Save] is disabled when [Auto Off] or [Custom] is selected in [Human Sensing].
Human Sensing
Auto Off The monitor’s backlight automatically turns off, and the volume mutes when no human presence is
detected during the period set at [Waiting Time].
When a person is near the monitor again, the monitor will automatically return to normal mode.
Disable Human sensing function is off.
Custom The monitor’s input signal, backlight and volume levels automatically shift to the setting at [Input Select],
[BackLight] and [Volume] when no human presence is detected during the period set at [Waiting Time].
When a person is near the monitor again, the monitor will automatically return the backlight and volume to
normal levels and reproduce the input signal selected for [Input Select].
Bekijk gratis de handleiding van Sharp MultiSync ME752, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sharp |
| Model | MultiSync ME752 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 7928 MB |
