Handleiding
Je bekijkt pagina 61 van 75
English−61
Schedule
Schedule
Power On Schedule Turns the monitor power on at the specied time. See page 36.
Add Power On Schedule Settings for conguring the power on schedule for the monitor.
Power Off Schedule Turns the monitor power off at the specied time.
Add Power Off Schedule Settings for conguring the power off schedule for the monitor.
Reboot Schedule Restarts the Android system at the specied time.
Add Reboot Schedule Settings for conguring when to reboot the Android system.
Schedule List Shows a list of schedules congured for the monitor.
Schedules can be enabled, disabled, edited, or deleted from the list.
Reset Resets all schedule menu settings back to factory setting.
TIP: • The [Date & Time] needs to be set before adding schedules.
• Each schedule must be set at an interval of 5 minutes or more.
• Up to 15 different schedules can be created.
Network
Network
Ethernet
Ethernet Sets whether or not to use a LAN terminal.
Congures the IP address and network information automatically or manually.
Obtain IP Address
Automatically
Sets whether or not to obtain the IP address automatically from the DHCP server.
When manually setting the IP address and other network settings, contact the network administrator for
the required information.
IP Address Enter the IP address for the monitor to use on the connected network when not using [Obtain IP Address
Automatically].
Default Gateway Enter the gateway for the network when not using [Obtain IP Address Automatically].
Netmask Enter the subnet mask data for the network when not using [Obtain IP Address Automatically].
DNS 1 Enter the primary DNS server settings for the network when not using [Obtain IP Address Automatically].
DNS 2 Enter the secondary DNS server settings for the network when not using [Obtain IP Address
Automatically].
MAC Address Shows the monitor’s [MAC Address].
Proxy Sets the proxy server settings of the network connected to the monitor.
None: No set the proxy.
Manual: Set the host name, port number, and address.
Proxy Auto-Cong: Set the URL that the proxy PAC le is on.
Ping Conrm successful connection with the network by communicating with a preset IP address.
IP Address Sets an [IP Address] for sending [Ping].
Execute Checks a reply can be sent to the monitor or not from the [IP Address] by sending [Ping].
Network Settings
HTTP Server Sets whether or not to use HTTP server functions.
AMX To turn on or off for the detection from AMX Device Discovery when connecting to a network supported by
an AMX’s NetLinx control system.
Monitor Control via Network Sets whether or not to control this monitor via the network.
NaViSet Secure Enables the use of the monitor’s NaViSet Secure function. When disabled, the monitor cannot be remotely
managed over a network via the NaViSet Secure encrypted communications tunnel, and the NaViSet
Secure settings are not available in the OSD menu.
Crestron Enables the use of the [Crestron Connected] function. When disabled, the Crestron function are not
available in the OSD menu.
Host Name Type in the hostname of the network to the monitor.
Up to 15 alphanumeric characters can be used.
Bekijk gratis de handleiding van Sharp MultiSync ME752, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sharp |
| Model | MultiSync ME752 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 7928 MB |
