Handleiding
Je bekijkt pagina 6 van 46
English−6
WARNING
Handling the power cord.
PROHIBITED
Do not scratch or modify the cord.
• Do not place heavy objects on the cord.
• Do not let the weight of the product rest on the cord.
• Do not cover the cord with a rug, etc.
• Do not bend, twist or pull the cord with excessive force.
• Do not apply heat to the cord.
Handle the power cord with care. Damaging the cord could lead to re or electric shock. If the cord
gets damaged (exposed core wires, broken wires, etc.), turn off the product’s power, then unplug the
power cord from the power outlet. Ask your dealer to replace it.
DO NOT
TOUCH
Do not touch the power plug if you hear thunder.
Doing so could result in electric shock.
DO NOT
TOUCH
WITH WET
HANDS
Do not connect or disconnect the power cord with wet hands.
It may cause an electric shock.
REQUIRED
Please use the power cord provided with this product in accordance with the power cord table.
Do not exceed the product’s specied power supply voltage where it is installed. Doing so could
result in a re or electric shock. Please refer to the power supply voltage information in the Product
Specications.
If a power cord is not supplied with this product, please contact us. For all other cases, please
use the power cord with the plug style that matches the power socket where the product is located.
The compatible power cord corresponds to the AC voltage of the power outlet and has been
approved by, and complies with, the safety standards in the country of purchase.
MUST BE
EARTHED
This equipment is designed to be used in the condition of the power cord connected to the earth.
If the power cord is not connected to the earth, it may cause electric shock. Please make sure the
power cord is connected to the wall outlet directly and earthed properly. Do not use a 2-pin plug
converter adapter.
REQUIRED
Please install the product in accordance with the following information.
When transporting, moving, or installing the product, please use as many people as necessary to
be able to lift the product without causing personal injury or damage to the product.
Please refer to the instructions included with the optional mounting equipment for detailed
information about attaching or removing.
Do not cover the vents on the product. Improper installation of the product may result in damage to
the product, an electric shock or re.
Do not install the product in the locations below:
• Narrow spaces, and poorly ventilated spaces.
• Near a radiator, other heat sources, or in direct sunshine.
• Continual vibration areas.
• Humid, dusty, steamy, or oily areas.
• An environment where there are corrosive gases (sulfur dioxide, hydrogen sulde, nitrogen
dioxide, chlorine, ammonia, ozone, etc.).
• Outdoors.
• High-temperature environment where humidity changes rapidly and condensation is likely to
occur.
Do not mount the product in any conguration or position not described in the OPERATION MANUAL.
Please check the Product Specications for the available Tilt range when installing the product.
Bekijk gratis de handleiding van Sharp MultiSync EA271F, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sharp |
| Model | MultiSync EA271F |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 4378 MB |
