Handleiding
Je bekijkt pagina 7 van 63
7
E
MOUNTING PRECAUTIONS
• For SHARP dealers or service engineers, please conrm
“Mounting Precautions (For SHARP dealers and service
engineers)”. (See page 60.)
• This product is for use indoors.
• When using a commercially available stand or mounting
bracket, use a stand or mounting bracket that comply with
VESA specications.
• Since the monitor is heavy, consult your dealer before
installing, removing or moving the monitor.
•
Mounting the monitor on the wall requires special expertise
and the work must be performed by an authorized dealer. You
should never attempt to perform any of this work yourself.
Our company will bear no responsibility for accidents or
injuries caused by improper mounting or mishandling.
• Use the monitor with the surface perpendicular to a level
surface. If necessary, the monitor may be tilted up to 20
degrees upward.
• When moving the monitor, be sure to hold the parts marked
by
below. Do not grasp the screen or control buttons.
This may cause product damage, failure, or injury.
• This monitor should be used at an ambient temperature
between 41°F (5°C) and 95°F (35°C). Provide enough
space around the monitor to prevent heat from
accumulating inside.
For the monitor in landscape orientation
Unit: inch [mm]
Unit: inch [mm]
For the monitor in portrait orientation
7-7/8 [200]
2 [50]
2
[50]
2
[50]
1-3/8 [35]
1-3/8 [35]
2 [50]
7-7/8 [200]
2
[50]
2
[50]
Power LED
• Be careful of high temperatures in the surrounding area.
If it is dicult to provide sucient space for any reason
such as the installation of the monitor inside a housing or
of several units side-by-side, or if the ambient temperature
may be outside of the range of 41°F (5°C) to 95°F (35°C),
install a fan or take other measures to keep the ambient
temperature within the required range.
•
When installing two or more monitor units side-by-side, provide
space of at least 3/16 inch (5 mm) around them to prevent stress
on the adjacent unit or structure due to thermal expansion.
• Temperature condition may change when using the monitor
together with the optional equipments recommended by
SHARP. In such cases, please check the temperature
condition specied by the optional equipments.
• Do not block any ventilation openings. If the temperature
inside the monitor rises, this could lead to a malfunction.
• Do not place the monitor on a device which generates heat.
• Do not use the product in locations where the unit is
exposed to direct sunlight or other strong light. Since this
product operates with infrared rays, such light may cause a
malfunction.
• When using multiple monitors closely, be sure the infrared
transmitter/receiver does not aect the other ones.
• Adhere to the following when installing the monitor in its
portrait orientation. Failing to adhere to the following may
cause malfunctions.
- Install the monitor such that the power LED is located on
the bottom side.
Power LED
- Set the “Screen Rotation” on the Admin Settings to
“Portrait”. (See page 49.)
• Use the cover SHARP logo when you install the monitor in
portrait orientation.
Cover SHARP logo
Upward-facing inclined installation
• When using the monitor laying at on a surface (when the
monitor is tilted more than 20 degrees upward from the
perpendicular in relation to a level surface), consult an
authorized dealer. There are some installation conditions.
Adhere to the following. Failing to adhere to the following
may cause malfunctions.
- It can be inclined upwards up to 45°.
- Use this monitor at the ambient temperature between
41°F (5°C) and 86°F (30°C). Provide 7-7/8 inch (200 mm)
or more space between the monitor and the oor or other
mounting surfaces and surrounding objects to prevent heat
from accumulating inside. If it is dicult to provide sucient
space or if the ambient temperature may be outside of the
range of 41°F (5°C) to 86°F (30°C), install a fan or take
other measures to keep the ambient temperature within the
required range.
Unit: inch [mm]
7-7/8 [200]
7-7/8 [200]
[200][200]
7-7/8 [200]
7-7/8 7-7/8
- Do not press hard on the LCD panel or otherwise subject
it to impacts.
Bekijk gratis de handleiding van Sharp LM551, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sharp |
| Model | LM551 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 8112 MB |
