Handleiding
Je bekijkt pagina 50 van 63
50
E
Menu Items
TIP
• When Ambient Light Sensing is turned ON, Backlight Dimming cannot be set.
• When Backlight Dimming is turned ON, Ambient Light Sensing cannot be set.
• Do not cover the optional sensor unit when “Ambient Light Sensing” is enabled.
• Even if you perform an “All Reset” on this monitor , the OPS installed on the expansion slot will not be reset.
• The “Date & Time” needs to be set before adding schedules.
• Each schedule must be set at an interval of 6 minutes or more.
• Up to 15 different schedules can be created.
• Power consumption by a device connected to this port depends on the USB device.
• 3rd party applications of this type are not guaranteed to work and are outside the scope of support and warranty.
• Always verify the authenticity and safety of an application before installation. Some applications may affect the operation of other applications
and of this monitor. Virus infections or, data corruption, falsification, or theft is possible.
• The selection of which settings to copy is reset to default if the monitor’s main power is turned off.
• The Mute Setting is released in the following cases:
• Changing the input signal.
• When the main power switch is turned off/on
• When turned off/on with the POWER button
• Returning the unit from power save.
• When the “Audio Mode” is changed
• When the volume is changed using the remote control or the unit keys
• Changing the video signal (resolution/scanning frequency).
• This function may not work depending on the application or MediaPlayer contents.
• When performing an “System Update”, connect a USB flash drive to the unit’s USB terminal for HOME mode.
• After updating the system to the latest version, it cannot be restored to a previous version.
• When “Auto Off” or “Custom” is selected in “Human Sensing”, “Start input mode” cannot be set.
• When the monitor is controlled via a network, there are the following restrictions on use.
• After turning the power on or off, you need to wait at least 2 minutes before performing the next control.
• The monitor control via network connection will be disconnected when the mode switches to “networked standby mode”, so reconnecting
is required.
• Before performing power control of the monitor using “Use Secure Protocol for Authentication”, you need to set “Mode” to “Normal”.
Bekijk gratis de handleiding van Sharp LM551, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sharp |
| Model | LM551 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 8112 MB |
