Handleiding
Je bekijkt pagina 79 van 176
English - 77
Replacing the receiving card
Remove the receiving card from the hub board.
Remove the four screws securing the receiving card, and then remove the receiving card from the hub board.
Remove the four screws.
Use a Phillips screwdriver (No. 1).
Tightening torque: 3 ± 0.5 kgf•cm
Hub board
Receiving card
Install the receiving card so that the
arrow is orientated to the left.
Perform the following after replacing the receiving card.
Check the hardware program
While referring to “Updating the hardware program”, check the version of the hardware program of the
receiving card and update the hardware program if the version does not match the version of the displays
whose receiving card has not been replaced.
Update the configuration data
While referring to “Saving the configuration data”, read the configuration data from a display whose
receiving card has not been replaced and save it as a file.
While referring to “Updating the hardware program”, write the saved file of the configuration data to the
receiving card that has been replaced.
Adjust the brightness, color temperature, and gamma
Perform “Image Setting” (English-65)
Bekijk gratis de handleiding van Sharp LD-D121, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sharp |
| Model | LD-D121 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 30920 MB |
