Handleiding
Je bekijkt pagina 36 van 139
EN - 17
Error Codes
If there is an error, an error code will be shown on the
heater displays.
E0
Ampere limit feature must be selected at the
moment the product is energized. Otherwise
E0 error is seen. At the same time, this
feature should be selected on the display
and mainboard. If there is an error in the
software of any card, the product will show
an error. The customer cannot interfere
in this error. Authorized service should be
called.
E1
Cooling Fan is disabled. Call an authorised
service agent.
E2
This error is seen when the heater gets too
hot. In case of this error, the heater must be
cooled. It should be operated after cooling,
again.
E3
Supply voltage is other than the rated
values. Switch the hob off by pressing
,wait until “H” disappears for all zones,
switch the hob on by pressing and
continue to use. If the same error is
displayed again, call an authorised service
agent.
E4
Supply frequency is different from the rated
values. Switch the hob off by pressing
, wait until “H” disappears from all
zones, switch the hob on by pressing
and continue to use. If the same error is
displayed again, switch the plug for the
appliance off and on. Switch the hob on by
pressing and continue to use. If the same
error is displayed again, call an authorised
service agent.
E5
Internal temperature of the hob is too high,
switch the hob off by pressing
and let the
heaters cool down.
E6
Communication error between the touch
control and heater. Call an authorised
service agent.
E7
Coil temperature sensor is disabled. Call an
authorized service agent.
E8
Cooler temperature sensor is disabled. Call
an authorized service agent.
EA
Large Coil Saturation Error. Switch the
hob off by pressing the on/off button,
and continue to use. If the same error is
displayed again, call an authorised service
agent.
EC
Supply Voltage Error.Switch the hob off by
pressing on/off button, and continue to use.
If the same error is displayed again, call an
authorised service agent.
C1-C8
Microprocessor alert. After this warning,
cut off energy from the product and then
re-energize the product. If the same error is
displayed again, call an authorised service
agent.
4.3 aCCeSSorieS
The Vitroceramic Glass Spatula
Always use the glass spatula to remove
spillages or deposits from the hob before
trying chemical cleaning agents. This is
the ideal method for removing even the
smallest deposits from the hob, and for
removing spillages from hot cooking zones
before they burn onto the hob.
Important: Always push the safety
cover back over the razor blade after use.
Take care when using the spatula and keep
it out of the reach of children.
Bekijk gratis de handleiding van Sharp KH-6I37FT0K-EU, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sharp |
| Model | KH-6I37FT0K-EU |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 11713 MB |
