Handleiding
Je bekijkt pagina 17 van 106
EN -8-
Electrical connection of your hob
• Before proceeding with the electrical
connection, verify that the current car-
rying capacity of the system and the
socket are adequate for the maximum
power rating of the hob.
• Electrical installation throughout the
residence and the electrical current
plug in use must be earthed and con-
form with safety regulations.
• If there is no dedicated hob circuit and
fused switch, they must be installed
by a qualied electrician before the
hob is connected.
• Fused switch must be easily accessi-
ble once the hob has been installed.
• Do not use adaptors, multiple sockets
and/or extension leads.
• A circuit breaker with a contact open-
ing of at least 3 mm, rated 20 A and
delayed functioning type must be in-
stalled inside the supply circuit.
• For the touch=controlled vitroceram-
ic hob, the cable must be H05VV-F
3X1,5 mm² / 60227 IEC 53. You will
nd the connection diagram shown on
the back of your appliance.
•
During installation, please ensure that
insulated cables are used. An incor-
rect connection might damage your
appliance. The warranty will not cover
such damages.
• All repairs must be carried out by au-
thorised service personnel or a quali-
ed electrician.
•
Unplug your appliance before each
maintenance. For reconnection, fol-
low the connection diagrams exactly.
Brown
Yellow+Green
Blue
• Apply the one-sided self-adhesive
sealing tape supplied all the way
round the lower edge of the cooking
surface along the outer edge of the
glass ceramic panel. Do not stretch it.
• Screw the four worktop mounting
brackets on the side walls of product
Bekijk gratis de handleiding van Sharp KH-3V19NT0K-EU, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sharp |
| Model | KH-3V19NT0K-EU |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 8667 MB |
