Handleiding
Je bekijkt pagina 17 van 29
EN - 17
activated.
The necessary power reduction is shown
by the corresponding cooking zone display
blinking. Blinking will be active for 3
seconds to allow for further adaptations of
the settings before power reduction.
Error Codes
If there is an error, an error code will be shown on the
heater displays.
E0
Ampere limit feature must be selected at the
moment the product is energized. Otherwise
E0 error is seen. At the same time, this
feature should be selected on the display
and mainboard. If there is an error in the
software of any card, the product will show
an error. The customer cannot interfere
in this error. Authorized service should be
called.
E1
Cooling Fan is disabled. Call an authorised
service agent.
E2
This error is seen when the heater gets too
hot. In case of this error, the heater must be
cooled. It should be operated after cooling,
again.
E3
Supply voltage is other than the rated values.
Switch the hob off by pressing
,wait until
“H” disappears for all zones, switch the hob
on by pressing and continue to use. If
the same error is displayed again, call an
authorised service agent.
E4
Supply frequency is different from the rated
values. Switch the hob off by pressing
, wait until “H” disappears from all
zones, switch the hob on by pressing
and continue to use. If the same error is
displayed again, switch the plug for the
appliance off and on. Switch the hob on by
pressing and continue to use. If the same
error is displayed again, call an authorised
service agent.
E5
Internal temperature of the hob is too high,
switch the hob off by pressing
and let the
heaters cool down.
E6
Communication error between the touch
control and heater. Call an authorised service
agent.
E7
Coil temperature sensor is disabled. Call an
authorized service agent.
E8
Cooler temperature sensor is disabled. Call
an authorized service agent.
EA
Large Coil Saturation Error. Switch the hob
off by pressing on/off button, switch the hob
on by pressing on/off button and continue to
use. If the same error is displayed again, call
an authorised service agent.
EC
Supply Voltage Error.Switch the hob off by
pressing on/off button, switch the hob on by
pressing on/off button and continue to use.
If the same error is displayed again, call an
authorised service agent.
C1-C8
Microprocessor alert. After this warning,
cut off energy from the product and then
re-energize the product. If the same error is
displayed again, call an authorised service
agent.
Main Oven Functions
* The functions available on your oven may
differ from those listed below depending on
the model purchased.
Defrost Function:
Switch on the
DEFROST function
using the main oven
function control knob.
The oven’s warning
lights will switch on,
and the fan will start operating. To use the
defrost function, place your frozen food on
a shelf in the middle of the oven. It is
recommended that you put an oven tray
under the defrosting food to catch
accumulated water due to melting ice. This
function will not cook or bake your food, it
will only help to defrost it.
Turbo Function:
Switch on the TURBO
function using the main
oven function control
knob. The oven’s
thermostat and
warning lights will
switch on, and the ring heating element and
fan will start operating. The temperature
can be adjusted using the main oven
function control knob. The turbo function
evenly disperses the heat in the oven so all
food on all racks will cook evenly. It is
recommended that you preheat the oven for
10 minutes.
Static Cooking
Function: Switch on
the STATIC function
using the main oven
function control knob.
The oven’s thermostat
and warning lights will
switch on, and the
lower and upper heating elements will start
operating. The temperature can be adjusted
using the main oven function control knob.
The static cooking function emits heat,
ensuring even cooking of food. This is ideal
for making pastries, cakes, baked pasta,
lasagne and pizza. Preheating the oven for
10 minutes is recommended and it is best
to cook on only one shelf at a time in this
function.
Bekijk gratis de handleiding van Sharp KF-66DIDD04IM1I-EN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sharp |
| Model | KF-66DIDD04IM1I-EN |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 2614 MB |
