Handleiding
Je bekijkt pagina 18 van 149
EN - 9
Worktop
min.
25 mm
min.
50 mm
Built-in hob
Built-in oven
If the oven is installed under a hob, the
distance between the worktop and the
top panel of the oven must be a mini-
mum of 50 mm and the distance bet-
ween the worktop and the top of control
panel must be a minimum of 25 mm.
WIRING AND SAFETY OF THE
BUILT IN OVEN
The instructions given below must be
followed explicitly during wiring:
– The grounding cable must be connec-
ted via the screw with the grounding
mark. The supply cable connection
must be carried out as shown in Fi-
gure 6. If there is no grounded outlet
conforming to regulations in the ins-
tallation environment, call the Authori-
zed Service Centre immediately.
– The grounded outlet must be in clo-
se proximity to the appliance.
Never use an extension cord.
– The supply cable should not
contact the product’s hot surface.
– In the event of any damage
to the supply cable, make sure to
call the Authorized Service Centre.
The cable must be replaced by the
Authorized Service technician.
– Wiring of the appliance must be per-
formed by the Authorized Service
technician. A H05VV-F type supply
cable must be used.
– Faulty wiring may damage the appli-
ance. Such damage will not be cove-
red under the warranty.
– The appliance is designed to connect
to 220-240V~. If the electricity is diffe-
rent than the value given above, call
the Authorized Service Centre imme-
diately.
– The manufacturer declares that its
bears no liability of any kind for
damage and loss arising from not
complying with safety standards!
BROWN
YELLOW
GREEN
BLUE
Bekijk gratis de handleiding van Sharp K-50M22IL2-EU, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sharp |
| Model | K-50M22IL2-EU |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 12349 MB |
